Australia’s first Alimak SC-45 industrial rack and pinion lift is installed on Downer’s new state-of-the-art Wingfield Asphalt Plant. Alimak worked closely with Downer, engineering the SC-45 lift to fit the plant’s pre-designed vertical lift shaft.
A ‘FIRST OF ITS KIND’ ASPHALT PLANT
Construction of Downer Infrastructure’s Wingfield Asphalt Manufacturing Facility was completed in June 2013, with the new facility designed to replace two 40-year-old plants nearing the end of their operational lives.
The manufacturing facility is the first of its kind outside of Europe, and marks a new benchmark in asphalt manufacturing in Australia, incorporating the latest recycling and process technology to reduce energy consumption, lower greenhouse gas emissions and reduce Downer’s carbon footprint. Located in Adelaide, South Australia, the new Wingfield plant will have the capacity to produce asphalt mixes with up to 75% reclaimed asphalt pavement material (recycled road).
PROVIDING ACCESS TO THE BATCH PLANT
In August 2013, Alimak completed the installation and commissioning of an Alimak SC-45 industrial rack and pinion lift on the manufacturing facility. Located on the batch plant, the Alimak SC-45 will provide personnel access and materials transport to the 5 levels of the plant structure, reducing crane lifting requirements and improving safety of operations on site.
MEETING PRE-DESIGN REQUIREMENTS
In designing the Wingfield Asphalt plant, Downer enlisted the design capabilities of the Amman Group, a European company specializing in the design and construction of standardized asphalt mixing plants. As the plant structure had been pre-designed to a template, an allowance for only a small 500kg materials-only hoist had been specified into the initial designs.
Alimak’s challenge was to fit an Alimak industrial lift, capable of materials and personnel transport, into the existing lift-shaft design. In doing so, Alimak engineered the lift to meet all structural load calculations provided for the pre-designed 500kg hoist, while ensuring compliance with Australia Lift Standards (AS 1735: Part 9).
A FIRST ALIMAK SC-45 IN AUSTRALIA
To meet these requirements, the Alimak SC-45 industrial lift was selected. As the first SC-45 installed in Australia, the lift was chosen for several reasons:
- A 1300kg capacity would reduce crane requirements during the lifting of replacement parts on the plant;
- A car size of 1.4 m x 2.4 m would accommodate the dimensions of an emergency stretcher, improving site safety and emergency response;
- The flexibility of the SC-45 design allowed it to be easily configured to fit the pre-design requirements and load calculations of the plant.
A ‘VIRTUAL SHAFT’ SYSTEM
Based on a one-size-fits-most-applications design, the Alimak SC-45 is perfectly suited for installation on new plants and retrofitting to existing structures. To meet the structural load calculations of the 500kg materials hoist template, Alimak designed the SC-45 lift ties and fixings so that no more than a 6kn load would be placed on the existing structure.
Alimak used the Wingfield plant’s existing stair tower for the fixing of the mast ties and brackets, while a vertical pipe enabled the lift to be set back from the landings for better access. It is this unique ‘Virtual Shaft’ system that enables the SC-45 lift to be installed quickly, with minimal work required to existing infrastructure.
AN ALL – WEATHER MAINTENANCE ACCESS SOLUTION
While much of Downer’s Wingfield Asphalt Manufacturing Facility is automated, routine maintenance and inspection of equipment is conducted daily. The Alimak SC-45 industrial lift provides a safe means of gaining access to the upper levels of the batch plant in all weather conditions, and reduces crane lifting on site for the movement of replacement parts and equipment.
Location: Wingfield Asphalt Manufacturing Plant, SA, Australia
Product model: ALIMAK SC-45
Application: Asphalt plant, maintenance lift
Capacity: 1300 kg
Car size: 1.4 m x 2.4 m
Speed: 0.6 m/sec
Lifting height: 24m
Alimak is a global market leader and pioneer in the design and manufacture of vertical access solutions for industrial and construction industries. The company provides high quality rack and pinion and traction elevators, construction hoists and work platforms. Alimak has a well-established global sales, service and distribution platform across more than 90 countries with strong market presence. The company has a large global installed base of over 23,000 units which provides unique know-how of all industrial application areas. Alimak was founded in 1948 and employs over 1,200 people across the world. Alimak is part of Alimak Group which is headquartered in Stockholm, Sweden.